Valves

 

Fig. 268 – Fig. 268LK 
Globe valve, straight type, complete with hand wheel. Pressure class PN 16 – cast iron.

Fig. 269 – Fig. 269LK
Globe valve, angle type, complete with hand wheel. Pressure class PN 16 – cast iron.

Fig. 1270 – Fig.1270LK
Globe valve, straight type, complete with hand wheel. Pressure class PN 16 – bronze.

Fig. 1271 – Fig. 1271LK

Globe valve, angle type, complete with hand wheel. Pressure class PN 16 – bronze.

Fig. 1272-1272LK
Globe valve, straight type, complete with hand wheel. Pressure class PN 16 – bronze.

Fig. 1273-1273 LK
Globe valve, angle type, complete with hand wheel. Pressure class PN 16 – bronze.

Gate valves:
(figur 1317)
DIN PN 10/16 – bronze

 Butterfly valve:

bray-model30
Wafertype – ANSI class 150/
DIN PN 10/16 – cast iron

Check valves:

(figur 68) 
Wafertype – DIN PN 10/16 –
steel

Ball valves:

418117xxx with lever female- female – brass
Complete with lever – female/female – brass 

418118xxx with lever female-male – brass
Complete with lever – female/male – brass

418119xxx with t-lever female-female brass
 With T-lever – female/female – brass 

418120xxx with t-lever female-male brass
With T-lever – female/male – brass

418515xxx 2-piece body AISI 316 – female-female – stainless steel
 2-piece body – full bore – AISI 316 – female/female – 
stainless steel

Structural steel

Structural steel.

     Bars:

          • Flat bar
          • Round bar
          • Square bar
          • Angle bar – equal
          • Angle bar – unequal

     Plates:

          • Steel plates ( hot formed) 
          • Chequer plates

     Beams:

          • Ibeams HE A
          • Ibeams HE B
          • Ibeams PE
          • U-channels NP
          • Rørbjælke cold formed square
          • Rørbjælker hot formed square
          • Rørbjælker cold formed rectangular
          • Rørbjælker hot formed rectangular

     Perforated Sheets:

          • Steel – Round holes
          • Steel – Square holes – trefoil
          • Steel – Oblong holes
          • Galvanized – round-square holes
          • Alu 2S, round – square – oblong holes
          • Alu 57 S, round – square holes
          • AISI 304, round – square – oblong holes
          • AISI 316, round – square holes
          • Brass, round – square holes, trefoil
          • 3 CR 12, round holes
          • Patterns Perf. plates

     Expand metal sheets:

          • Patterns, stretch metal

Fittings, screwed

Mallable fittings:

          • Bend 90 deg NO 1 
          • Short bend 90 degr NO 1,A
          • Long sweep bend 90 degr – No 2
          • Short bend 90 degr NO 2A
          • Long sweep bend 90 degr NO 3
          • Long sweep bend 45 degr NO 40
          • Long sweep bend 45 degr NO 41
          • Crossover NO 85
          • Elbow 90 degr reducing NO 90
          • Elbow 90 equal NO 92.
          • Elbow reducing NO 92.
          • Union elbow, taper seat NO 96
          • Union elbow, taper seat NO 98
          • Elbow 45 degr NO 120
          • Tee, Reducing or increasing on the branch NO 130   
          • Tee, reducing or increasing on the branch NO 131
          • Tee 45 degr NO 165
          • Cross reducing NO 180
          • Reducing socket NO 240
          • Reducing bush NO 241 
          • Hexagon nippel reducing No 242
          • Socket reducing No 246
          • Socket No 270
          • Hexagon nippel No 280
          • Plug plain No 291
          • Cap No 300
          • Backnut No 310
          • Flange No 321
          • Union taper seat No 340
          • Union Taper seat No 341

     Stainless fittings:

          • Bends 90 degr
          • Crossover
          • Elbows 90 degr
          • Elbows 45 degr
          • Tees
          • Crosses
          • Reducing sockets Female – female
          • Sockets
          • Reducing bushings
          • Double nippels
          • Reducing nippels
          • Socket half
          • Plain nippels
          • Backnut Hexagon
          • Unions
          • Plugs
          • Caps
          • Hoes
          • Hoes nippels
          • Pipe nippels short
          • Pipe nippels

Steel fittings, screwed:

          EN10241
          • Caps EN 10241
          • Elbows equal 45 degr.
          • Elbows
          • Hexagonal backnuts
          • Hexagonal bushing
          • Hexagonal head plugs
          • Hexagonal nipples equal reduced
          • Reducing sockets
          • Sockets and half sockets type heavy
          • Sockets and half sockets type medium
          • Square head plugs
          • Street elbow equal
          • Tees reduced
          • Unions flat conical seat

           Forged fittings, NPT-gevind, ANSI B16.11:
          • Hex. bushings
          • Caps – (black-galvanised)
          • Straight couplings
          • Half Couplings
          • Reducing couplings
          • Crosses – black – 3000 Lbs
          • Elbows 45 degree
          • Elbows 90 degree
          • Elbows 90 degr – Male – Female
          • Hexagon head plugs
          • Square head plugs
          • Round head plugs
          • Hexagon nippels
          • Hexagon nippels reduced
          • Tees Equal
          • Tees Reduced
          • Unioner female- female
          • Unioner male-Female
    

           Forged fittings, Socket Weld, ANSI B16.11:
          • Caps
          • Couplings
          • Couplings – half
          • Couplings reduced
          • Crosses
          • Elbows 45 degr
          • Elbows 90 degr
          • Inserts reduced
          • Tees equal
          • Tees reduced
          • Unions female – female

Fittings for welding

Fittings for welding DIN/ISO/ANSI norm.

Black fittings for welding, DIN/ISO:

          • Concentric reduceres DIN 2616
          • Excentric reducers DIN 2616
          • Elbows DIN 2619
          • Elbows 90 deg (2s radius)
          • Elbows 90 deg (3s Radius)
          • Elbows 90 deg (5S – Radius)
          • Elbows 90 deg st 37
          • Elbow 180 deg
          • End caps DIN 2617
          • End caps DIN 28011
          • Full flow tees
          • Saddels DIN 2618
          • T-Pieces DIN 2615

Stainless fittings for welding, DIN/ISO:

          • Concentric reducers 316 L
          • Elbows 316 L
          • Endcaps 316 L
          • Lap joint flanges
          • Welding Collars 316 L
          • Welding Nipples 316 L
          • Welding Unions 316 L

Black fittings for welding, ANSI B16.9:

          • Elbows long radius ANSI B16.9
          • Elbows short radius ANSI B16.28
          • Reducers - Concentric - Excentric 
          • Tees Equal 
          • Tees Reducing 
          • End caps

Stainless fittings for welding, ANSI B16.9

          • Concentric reducers B16.9
          • Elbows B16.9
          • End caps B16,9
          • T-pieces B16,9

GDPR

Dan-Equip A / S complies with the basic principles of all data processing and the obligations that accompany the General Data Protection Regulation.   

Accountability

Legality, Reasonability and Transparency.

Legal, reasonable and transparent to the data subject

Data Quality

The information must be correct and updated if necessary

Any reasonable steps are taken to ensure that personal information that is incorrect is immediately deleted or corrected.

Purpose limitation.

Collection of information is for explicitly stated and legitimate purposes and subsequent processing may not be incompatible with these purposes.

Statistical purposes (etc.) are basically compatible (articel 89)

Deleting.

The information is stored in such a way that it is not possible to identify the data subjects for a longer period than the purpose indicates

Possibility of storage for statistical purposes, etc (art. 89)

Data Minimization.

Information is relevant, sufficient and limited to what is necessary for the purposes.

 "Can we reach the goal with less information" - then we do it ..

Integrity and confidentiality.

Adequate security of personal data, hereby also against unauthorized or unlawful treatment or incidental loss, destruction or damage, using appropriate technical or organizational measures.